Connects to a server with specified IP address( or hostname) and port.
client.connect(ip_addr, port)
client.connect(hostname, port)
ip_addr - the IP address which the client will connect to
port - the port number that the client will connect to
hostname - the hostname that the client will connect to
1 - on success
0 - on failure
#include <SPI.h>
#include <Phpoc.h>
char server_name[] = "www.arduino.cc";
PhpocClient client;
void setup() {
Serial.begin(9600);
while(!Serial)
;
Serial.println("PHPoC TCP Client test");
Phpoc.begin(PF_LOG_SPI | PF_LOG_NET);
//Phpoc.begin();
if(client.connect(server_name, 80))
{
Serial.println("connected");
client.println("GET / HTTP/1.0");
client.println();
}
else
Serial.println("connection failed");
}
void loop() {
if(client.available())
{
char c = client.read();
Serial.print(c);
}
if(!client.connected())
{
Serial.println("disconnected");
client.stop();
while(1)
;
}
}