read()

Description

Reads the next byte received from the server the client is connected to.

Syntax

client.read()

Parameters

none

Returns

the next byte - on success
-1 - on failure

Example

#include <SPI.h>
#include <Phpoc.h>

char server_name[] = "www.arduino.cc";
PhpocClient client;

void setup() {
  Serial.begin(9600);
  while(!Serial)
    ;

  Serial.println("PHPoC TCP Client test");

  Phpoc.begin(PF_LOG_SPI | PF_LOG_NET);
  //Phpoc.begin();

  if(client.connect(server_name, 80))
  {
    Serial.println("connected");
    client.write("GET / HTTP/1.0\r\n", 16);
    client.println();
  }
  else
    Serial.println("connection failed");
}

void loop() {
  if(client.available())
  {
    char c = client.read();
    Serial.print(c);
  }

  if(!client.connected())
  {
    Serial.println("disconnected");
    client.stop();
    while(1)
      ;
  }
}