Writes data to the server the client is connected to.
This data is sent as a byte or series of bytes.
client.write(val)
client.write(buf, len)
val - a value to send as a single byte (byte of char)
buf - an array to send as a series of bytes (byte or char)
len - the length of the buffer
Returns an int represents the number of bytes written.
#include <SPI.h>
#include <Phpoc.h>
char server_name[] = "www.arduino.cc";
PhpocClient client;
void setup() {
Serial.begin(9600);
while(!Serial)
;
Serial.println("PHPoC TCP Client test");
Phpoc.begin(PF_LOG_SPI | PF_LOG_NET);
//Phpoc.begin();
if(client.connect(server_name, 80))
{
Serial.println("connected");
client.write("GET / HTTP/1.0\r\n", 16);
client.println();
}
else
Serial.println("connection failed");
}
void loop() {
if(client.available())
{
char c = client.read();
Serial.print(c);
}
if(!client.connected())
{
Serial.println("disconnected");
client.stop();
while(1)
;
}
}