Connects to an SSL server with specified IP address( or hostname) and port.
client.connectSSL(ip_addr, port)
client.connectSSL(hostname, port)
ip_addr - the IP address which the SSL client will connect to
port - the port number that the SSL client will connect to
hostname - the hostname that the SSL client will connect to
1 - on success
0 - on failure
#include <SPI.h>
#include <Phpoc.h>
char server[] = "www.arduino.cc";
PhpocClient client;
void setup() {
Serial.begin(9600);
while(!Serial)
;
Serial.println("PHPoC SSL Client test");
Phpoc.begin(PF_LOG_SPI | PF_LOG_NET);
//Phpoc.begin();
if(client.connectSSL(server, 443)) {
Serial.println("Connected to server");
// Make a HTTP request:
client.println("GET /asciilogo.txt HTTP/1.1");
client.println("Host: www.arduino.cc");
client.println("Connection: close");
client.println();
Serial.println("Request sent");
}
}
void loop() {
// if there are incoming bytes available
// from the server, read them and print them:
while (client.available()) {
char c = client.read();
Serial.write(c);
}
// if the server's disconnected, stop the client:
if (!client.connected()) {
Serial.println();
Serial.println("disconnecting from server.");
client.stop();
// do nothing forevermore:
while (true);
}
}